zinc plate gauge

Prediction Model of Coating Thickness in Hot-Dip Galvanizing

帶鋼連續熱鍍鋅層厚度預測模型研究

The required thickness of coating is obtained by the action of closed circuit control system above the molten zinc level (air knife).

通過氣刀和鍍層閉環控制系統對液態鋅層厚度的調節使鍍層厚度達到設定要求

Mass Calculation of coating (For equal coating)/MM

鋅鍍層質量(兩個相同鋅鍍層厚度)

Effect of Ni Content in Zn Bath on Thickness of Hot Dip Galvanized Coating

鋅浴中鎳含量對熱浸鋅鍍層厚度的影響

"To achieve good quality heavier coatings, srip roughness and pot chemistry must be appropriate for the combination of coating weight and line speed."

為取得良好的厚鍍層,鋼帶粗糙度和鋅鍋內金屬成分必須適應于鍍層厚度及生產線速度。

Base metal, application, JIS & ASTM standard, and Normal thickness of galvanized steel sheet

常用的鍍鋅鋼片(電解片)的基層金屬、用途、日工標準、美材標準及一般厚度

There was ten tenths cloud at that time.

當時云層厚度是十度。

having a thickness made up of two layers or strands.

有兩層或兩股厚度的。

having a thickness made up of four layers or strands.

有四層或四股厚度的。

having a thickness made up of three layers or strands.

有三層或三股厚度的。

pipe concrete coating thickness

管子混凝土加重層厚度

minimum cover of reinforcement

鋼筋保護層的最小厚度

gravimetric coating thickness test

稱重法涂層厚度測試

A single thickness of a split hide.

皮厚一層被剝下的皮的厚度

A film or layer of a compound one molecule thick.

單分子層一分子厚度化合物的膜或層

The Rational Position and Thickness of Semi-rigid Base in Asphalt Pavement

半剛性基層合理層位與合理厚度研究

Effect of Buffer Layer Thickness on Ge/Si Multilayer

緩沖層厚度對Ge/Si多層膜的影響

A layer of hot-dipped galvanizing causes a considerable reduction in the fatigue strength.

熱浸鍍鋅層引起疲勞強度的顯著降低。